Mercedes-benz 2013 CLA Class Instrukcja Użytkownika Pobierz pdf (Strona 312)

Fitting/removing the towing eye

Fitting the towing eye

Remove the towing eye from the stowage

space.

The towing eye is located with the vehicle

tool kit under the boot floor (Y page 273).

Vehicles with a TIREFIT kit: the towing eye

is located under the tyre inflation compres-

sor.

Press the mark on cover : inwards in the

direction of the arrow.

Remove cover : from the opening.

Screw the towing eye in clockwise to the

stop and tighten it.

Vehicles with a trailer tow hitch do not have

a bracket for the screw-in towing eye at the

back. If you intend to use the vehicle for tow-

ing, fold out the ball coupling (Y page 203)

and secure the towbar to it.

Removing the towing eye

Loosen the towing eye and unscrew it.

Position the top of cover : in the bumper

and press it in at the bottom until it

engages.

Place the towing eye in the stowage well

under the boot floor (Y page 273).

Vehicles with a TIREFIT kit: replace the tyre

inflation compressor.

Towing the vehicle with the front axle

raised

The ignition must be switched off if you

are towing the vehicle with the front axle

raised. Intervention by ESP

could other-

wise damage the brake system.

Turn the key to position 2 in the ignition

lock.

When the vehicle is stationary, depress the

brake pedal and keep it depressed.

Vehicles with manual transmission:

depress the clutch pedal fully and shift to

neutral.

Vehicles with automatic transmission:

shift the automatic transmission to posi-

tion P.

Release the brake pedal.

Release the electric parking brake.

Deactivate automatic locking

(Y page 223).

Switch on the hazard warning lamps

(Y page 110).

Turn the key in the ignition lock to position

0 and leave the key in the ignition lock.

When towing your vehicle with the front axle

raised, it is important that you observe the

safety instructions (Y page 308).

Towing the vehicle with both axles on

the ground

In order to signal a change of direction

when towing with the hazard warning lamps

switched on, use the combination switch as

usual. In this case, only the turn signals for

the desired direction flash. When you reset

310

Towing and tow-starting

Breakdown assistance

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 351 352

Mercedes-benz 2013 CLA Class Instrukcja Użytkownika Strona 312

Komentarze do niniejszej Instrukcji

Mercedes-benz 2013 CLA Class Instrukcja Użytkownika Strona 312

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Samochody Mercedes-benz 2013 CLA Class